DIY Pallet Installation
Learn How To Easily Install Your Own Custom Pallet Walls With Our Step-By-Step Guide
DIY Pallet Installation Guide
Installation Essentials
- Arrange boards on the floor first to blend colors and patterns.
- Start at the ceiling with full-width boards for a polished finish.
- Begin each row with different board lengths to avoid visible patterns.
- Use fast-grab caulk and brad nails for secure installation.
- Ensure board thickness around outlets is consistent for a flush finish.
- Keep joints, colors, and board sizes random to avoid patterns.
Tools Needed
Tools for Installation
- Saw (Miter saw, cordless saw, or hand saw)
- Brad nailer (18 gauge) with 1 1/2” nails
- Caulk and caulk gun (Loctite PowerGrab recommended)
- Masking tape
- Tape measure
- Pencil
Step-by-Step Instructions
Measure and Layout
Measure your wall and tape off the floor to outline the area where the pallet wall will be installed. Lay out your boards on the floor, starting with accent colors.
Arrange Colors
Gradually add in additional colors, keeping the fill color for last. Begin translating the layout to your wall row by row.
Install from the Top
Start the first row at the ceiling and work your way down. Begin each row with a full piece and stagger lengths in subsequent rows.
Apply Adhesive and Secure
Apply three quarter-sized dots of glue to the back of each board, then secure it with 3-4 brad nails. Continue gluing and securing boards until you complete each row.
Cutting and Finishing
Measure, mark, and cut boards as needed to fit at the end of each row. Continue until the entire wall is covered.
Final Touches
Once installed, your pallet wall requires no additional topcoat or maintenance.
Find Your Perfect Pallet Wall Solution
Starting at just $3/sqft for high-quality pallet wood
and $9/sqft for professional installation.